Keonn Rfid Multiplexer UHF AdvanMux-16 (16-Port)
Click to enlarge

Out of stock

Keonn Rfid Multiplexer UHF AdvanMux-16 (16-Port)

sold in last hours
Vendor: Keonn
SKU: KEONN-AdvanMux-16
Real Time 18 Visitor Right Now

Categories: Fixed Rfid Readers, RFID Readers,

Product Type: Fixed Reader

Barcode: -


The Keonn AdvanMux-16 is a high-performance sixteen-port Fixed RFID Reader that connects to the I/O port of most models of RFID Readers and is controlled by sending simple commands to the reader, and can be controlled by standard +5V digital outputs and open collector.

AdvanMux-16 Fixed Reader is easy to connect to all RFID readers on the market, Keonn AdvanReaders, Impinj, Sirit, Motorola, ThingMagic, Mercury and others... The cable adapter is easily extended to the required length using cables 8 wire Ethernet, two RF45 control connectors are available on each AdvanMux-16 so that one multiplexer can control another multiplexer over the cable.

This 16-Port Fixed RFID Reader expands the number of antennas connected to each port of an RFID reader by a factor of 16.

- Operating Frequency:Global (860-950 MHz)

- Number of Ports:16
- RF Connectors:1 input and 16 output SMA 50 ohm female connectors
- Control and Power Connector:2 input/output RJ45 connectors
- Digital Inputs:0 V/5 V TTL/3 V TTL or open collector. Note: Reader outputs must sink 2 mA (maximum).
- Power Supply:RJ45 IN connector pin 4 and/or pin 5: 5 V (-2 %) to 48 V (+5 %) (regulated on board)
- Dimensions (With Enclosure):145 x 75 x 25 mm (5.7 x 3 x 1 in)
- Dimensions (Without Enclosure):137 x 75 x 17 mm (5.4 x 3 x 0.7 in)
- Weight (With Enclosure):0.240 kg (0.529 lbs)
- Weight (Without Enclosure):0.107 kg (0.236 lbs)

- Operating Temperature:-30 °C to 55 °C (-22 °F to 131 °F)