The Keonn AdvanMux-8 is a high performance 8-port RFID Reader and is connected to the I/O port of most reader models and is controlled by sending simple commands to the reader, making it easy to control the RFID Reader and its synchronization with the reader.

The AdvanMux-8 Fixed RFID Reader can be controlled by standard +5V and open collector digital outputs, it is easy to connect with all RFID readers on the market, Keonn AdvanReaders, Impinj, Sirit, Motorola, ThingMagic Mercury6 and others.

With its cable adapter, the Fixed RFID Reader is easy to extend to the required length using regular 8-wire Ethernet cables. The Keonn AdvanMux-8 8-Port Fixed Reader is a UHF RFID multiplexer that expands the number of antennas connected to each port of an RFID reader by a factor of 8.

ELECTRICAL:
- Operating Frequency:Global (860-950 MHz)

MECHANICAL:
- Number of Ports:8
- RF Connectors:1 input and 8 output SMA 50 ohm female connectors
- Control and Power Connector:2 input/output RJ45 connectors
- Digital Inputs:0 V/5 V TTL/3 V TTL or open collector. Note 1: Reader outputs must sink 2 mA (maximum). Note 2: 3.3 V readers must be 5 V tolerant.
- Power Supply:Pin 6: 5 V (±5 %), or Pin 4 & 5: 5 V (-2 %) to 48 V (+5%) through PoE (regulated on board). Note: Maximum rating is 50 V
- Dimensions (With Enclosure):150 x 92 x 25 mm (5.9 x 3.6 x 1 in)
- Dimensions (Without Enclosure):150 x 92 x 17 mm (5.9 x 3.6 x 0.7 in)
- Weight (With Enclosure):0.210 kg (0.463 lbs)
- Weight (Without Enclosure):0.077 kg (0.170 lbs)

ENVIRONMENT:
- Operating Temperature:-30 °C to 55 °C (-22 °F to 131 °F)